Showing posts with label Novel. Show all posts
Showing posts with label Novel. Show all posts

Tuesday, February 22, 2011

Novel device sheds light on the beauty of science


Novel device sheds light on the beauty of science

Novel device sheds light on the beauty of science

Monmorillonite particles, cut apart to reveal that one of them is hollow.


The wonder of science often comes from the endless possibilities opened up by each successive discovery and the unexpected findings that result. Scientists at the University of Bristol now have a new tool that will yield yet more and unprecedented levels of information – and crucially, without disturbing the natural, physical state of the object under scrutiny.



The past few months have seen physicists at Bristol’s Interface Analysis Centre vying for time on the dualbeam instrument, which as centre Director Dr. Tom Scott says, “unlocks the key to a whole new world”.


It has so far produced hundreds of images that are as beautiful as they are revelatory, and those at the IAC are keen to see what more the dualbeam can do, working with colleagues from across the University to delve into all matter, from diamonds to insect ears.


The dualbeam looks at surface structures with a resolution of less than a nanometre – the equivalent of ten millionths of the thickness of a human hair.  The resolution of the images produced is just one nanometre, which is beyond miniscule, given that it takes 1,000 nanometres to make one micron, and 1,000 microns constitute a single millimetre. 


The dualbeam is so called because it operates using two systems – a focused ion beam (FIB) and a high spec field emission scanning electron microscope (SEM).  It operates using gallium ions derived from a liquid metal ion source that are directed at the surface in a tightly controlled beam in which individual atoms are travelling at speeds  of up to one million miles an hour. The ion beam can be precisely controlled to remove material from tightly defined areas – essentially performing micro and even nano-surgery on almost any material.


Novel device sheds light on the beauty of science

A nano-wire made using ion beam milling for gas sensing applications. It also happens to look like a small-scale version of the Clifton suspension bridge.

Unlike other techniques used for dissecting materials, the dualbeam can extract information and capture images without causing any detectable damage except over a tiny area.  It can also deposit materials such as gold and platinum, known for their conductivity, on to the surface structure, providing insights into the composition and behaviour of materials.

For physicists looking for quantum wells, biologists looking at the structure of membranes in the ears of tree crickets, and engineers keen to understand the nanostructure of exotic alloys, the dualbeam seems to hold the key to success. 


“It makes things possible which were previously considered impossible, it’s at the heart of what makes science beautiful,” says Dr. Scott.  “It can do things in such a precisely defined way to such a high degree of accuracy that it really is incredible.  In fact, it’s difficult to comprehend just how small a scale this thing works on.”


Some of the project proposals under consideration that would make use of the dualbeam include an examination of the ears of Indian tree crickets, where the dualbeam could be used to slice and view in three dimensions reconstructions of cricket ears.  The findings could ultimately inform medical advancements in hearing devices for humans.


Another involves examining the materials used to build nuclear power stations.  The rate at which they age, and the outputs produced as they do so, is of serious concern.  A closer examination of the microstructure of stainless steels, and the processes by which they accommodate strain when affected by thermal cycling in power stations, would yield significant information about potential failure risks that could subsequently be safeguarded against in the design of the next generation of power stations. 


The dualbeam could also be used in quantum cryptography, to devise ways of transmitting messages in a way that is resistant to attempts to tap into the source, using emitters constructed from a single photonic light source so small and so intricately encoded as to be virtually undetectable.


In biochemistry, researchers are looking at making actuators - “gold sandwiches” with a polymer filling which could swim through the bloodstream, collecting information that could be used to inform medical approaches to human disease.


Dissecting and reconstructing structures in three dimensions can take a matter of minutes or hours, depending on the volume of the material under scrutiny.  The dualbeam also has an automation capability which allows researchers to program it to carry out operational tasks, freeing them up to continue with something else. Dr. Scott compares it to a multi-faceted kitchen aid: “This machine basically does all the slicing and dicing, leaving you to concentrate on making a really fantastic meal.”


Dr. Scott is keen to seek out other collaborations that will test the boundaries of every discipline and put materials and this new tool through its paces:  “The dualbeam instrument is a clear example of the University’s commitment to groundbreaking developments in research. If we are going to be the leaders in the UK and internationally in terms of research we need to be pushing the boundaries of what is technically possible, and this new piece of equipment will certainly enable us to do that.”

Saturday, February 12, 2011

Novel tailor-made nanoferroelectric from building blocks


Novel tailor-made nanoferroelectric from building blocks

Novel tailor-made nanoferroelectric from building blocks

Enlarge


Fig. An artificial superlattice assembled from perovskite nanosheets (A=Ca2Nb3O10, B=LaNb2O7). The success of growth of such well-controlled superlattices with a good interface quality enabled us to explore new properties of perovskite superlattices. By artificial structuring, the group found that the (LaNb2O7/Ca2Nb3O10) superlattice possesses a new form of interface coupling, which gives rise to ferroelectricity even at several nanometer thicknesses.


A research group at the Japan's National Institute for Materials Science have successfully developed a novel nanoferroelectric by a solution-based bottom-up nanotechnology.



A research group headed by MANA Scientist Dr. Minoru Osada and Principal Investigator Dr. Takayoshi Sasaki of the International Center for Materials Nanoarchitectonics at the National Institute for Materials Science successfully developed a novel nanoferroelectric by a solution-based bottom-up nanotechnology.


Ferroelectric materials are one of dielectrics that possess spontaneous and reversible electric dipole moments — an electric polarization remains after applying and removing an external electric field, from which ferroelectric materials can be worked as a nonvolatile memory, representing "0" in one orientation and "1" in the other. Ferroelectric memory (FeRAM) features high-speed access, high endurance in write mode, low power consumption, non-volatility, and excellent tamper resistance. It is therefore ideal memory for use in smart cards, as well as cellular phones and other devices. The continuous downscaling of microelectronic circuits combined with increasing interest in ferroelectric thin films for FeRAMs is drawing great attention to ferroelectric nanostructures / nanofilms. Until recently, it was technologically difficult to stabilize ferroelectricity on the nanoscale.


Seeking to develop a new nanoferroelectrics, this research group created a superlattice film based molecularly-thin oxide nanosheets as building blocks. The group synthesized two different perovskite nanosheets (Ca2Nb3O10, LaNb2O7), and fabricated an artificial superlattice by alternately stacking of two nanosheets via solution-based layer-by-layer assembly, in the same way that children play with building blocks. By artificial structuring, the group found that, in contrast to the paraelectric nature of Ca2Nb3O10 and LaNb2O7, the (LaNb2O7/Ca2Nb3O10) superlattice possesses a new form of interface coupling, which gives rise to ferroelectricity at room temperature. This artificial superlattice exhibited robust ferroelectric properties even at several nanometer thicknesses, which is the world’s thinnest level. This achievement has a great potential for the rational design and construction of nanoferroelectrics, and will also open a new route to the development of lead-free ferroelectric devices desirable for future electronic equipments.


The results was published in ACS Nano on November 23.

Tuesday, January 25, 2011

Novel tailor-made nanoferroelectric from building blocks


Novel tailor-made nanoferroelectric from building blocks

Novel tailor-made nanoferroelectric from building blocks

Enlarge


Fig. An artificial superlattice assembled from perovskite nanosheets (A=Ca2Nb3O10, B=LaNb2O7). The success of growth of such well-controlled superlattices with a good interface quality enabled us to explore new properties of perovskite superlattices. By artificial structuring, the group found that the (LaNb2O7/Ca2Nb3O10) superlattice possesses a new form of interface coupling, which gives rise to ferroelectricity even at several nanometer thicknesses.


A research group at the Japan's National Institute for Materials Science have successfully developed a novel nanoferroelectric by a solution-based bottom-up nanotechnology.



A research group headed by MANA Scientist Dr. Minoru Osada and Principal Investigator Dr. Takayoshi Sasaki of the International Center for Materials Nanoarchitectonics at the National Institute for Materials Science successfully developed a novel nanoferroelectric by a solution-based bottom-up nanotechnology.


Ferroelectric materials are one of dielectrics that possess spontaneous and reversible electric dipole moments — an electric polarization remains after applying and removing an external electric field, from which ferroelectric materials can be worked as a nonvolatile memory, representing "0" in one orientation and "1" in the other. Ferroelectric memory (FeRAM) features high-speed access, high endurance in write mode, low power consumption, non-volatility, and excellent tamper resistance. It is therefore ideal memory for use in smart cards, as well as cellular phones and other devices. The continuous downscaling of microelectronic circuits combined with increasing interest in ferroelectric thin films for FeRAMs is drawing great attention to ferroelectric nanostructures / nanofilms. Until recently, it was technologically difficult to stabilize ferroelectricity on the nanoscale.


Seeking to develop a new nanoferroelectrics, this research group created a superlattice film based molecularly-thin oxide nanosheets as building blocks. The group synthesized two different perovskite nanosheets (Ca2Nb3O10, LaNb2O7), and fabricated an artificial superlattice by alternately stacking of two nanosheets via solution-based layer-by-layer assembly, in the same way that children play with building blocks. By artificial structuring, the group found that, in contrast to the paraelectric nature of Ca2Nb3O10 and LaNb2O7, the (LaNb2O7/Ca2Nb3O10) superlattice possesses a new form of interface coupling, which gives rise to ferroelectricity at room temperature. This artificial superlattice exhibited robust ferroelectric properties even at several nanometer thicknesses, which is the world’s thinnest level. This achievement has a great potential for the rational design and construction of nanoferroelectrics, and will also open a new route to the development of lead-free ferroelectric devices desirable for future electronic equipments.


The results was published in ACS Nano on November 23.